Product description:
1、 Composition: The acrylic anticorrosive varnish is made of acrylic acid resin as component 1, curing agent as component 2, and component 1 and component 2 are supplied separately according to the specified proportion.
2、 Characteristics and application: The acrylic anticorrosive varnish has excellent mechanical properties, excellent weather resistance and decorative properties, bright and full film, and good decorative properties. It can be used as the exterior gloss of aircraft, cars, etc., and also as the coating of high-grade building exterior walls.
3、 Technical indicators:
Product description:
1、 Composition: The acrylic anticorrosive varnish is made of acrylic acid resin as component 1, curing agent as component 2, and component 1 and component 2 are supplied separately according to the specified proportion.
2、 Characteristics and application: The acrylic anticorrosive varnish has excellent mechanical properties, excellent weather resistance and decorative properties, bright and full film, and good decorative properties. It can be used as the exterior gloss of aircraft, cars, etc., and also as the coating of high-grade building exterior walls.
3、 Technical indicators:
项目 | 指标 |
---|---|
漆膜外观 | 透明无机械杂质 |
固体含量(成分一) | 47±2% |
附着力 | 不大于 2级 |
冲击强度 | 50kg/㎡ |
柔韧性 | 1mm |
硬度 | 0.5 |
干燥时间 表干 | 0.5 |
干燥时间 实干 | 24 |
耐水性(常温) | 72h漆膜不起泡,不脱落 |
4、 Construction reference:
1. The two components must be used together according to the required proportion. The paint should be mixed evenly and configured in strict accordance with the instructions. The prepared paint should be used up within the specified period to avoid waste due to gelatinization.
2. The surface of the object to be coated must be clean, free of acid, alkali and moisture, dry and smooth.
3. In order to make the two components fully cross-linked and cured, the paint can be cured at room temperature for 10 minutes before spraying. If the drying environment is lower than 22 ℃ and there is no heating drying condition, the curing time can be appropriately extended.
4. Since Component 2 is easy to react with water, acid and other substances, special diluents must be used during use. Do not contact with water, gasoline or alcohol. The remaining package of Component 2 after paint preparation should be tightly covered to avoid waste due to gelatinization and deterioration.
Copyright © Zhongkangtaibo (Tianjin) Anti-corrosion Coating Co., Ltd.
网友评论
评论发表